Top Tips for Properly Maintaining Your Washing Machine
There are a lot of washing machine repairs that can be done to your washer; over time, and after a lot of uses, it breaks down, gets knocked off cycle and so much more. However, you can avoid having to deal with these repairs by properly maintaining it, to do this you can follow the top tips that are mentioned below.
Tip One:
Check the Hoses – After every few washes, be sure to check the hoses on the washing machine for signs of weak spots or wear and tear. To be on the safe side, it should be done a few times every month. If you notice any blistering happening, or cracks, you need to replace the hose, because any kind of damage can cause a leak or make the hose burst. This can result in a massive amount of flood damage. Either way, you should replace the hose at least once every five years, and stainless steel hoses are the best.
Tip Two:
Stop Flood Damage from Happening – You can prevent the possibility of water damage from happening by doing one of the two following things; having and using what is known as a water shutoff system, which will automatically shut off if it detects a flow of water, or having a washing machine pan for overflow. This is more ideal for drips and leaks that are smaller.
Tip Three:
Don't Jam Everything in at Once – Loads that are larger than they are supposed to be can knock the machine off center, which will result in a long list of other issues.
Tip Four:
Clean the Inside of the Machine – You should clean the inside of the washing machine at least once a month because it is common for there to be a buildup of detergent, which leads to an inaccurate washing of the laundry.
Tip Five:
Prevent Rust – To prevent rust from happening, it is most recommended to cover any scrapes and or gashes with paint; you should do this as soon as possible to ensure no rust at all.
Tip Six:
Clean the other areas – This includes the fabric softener dispenser, the lint holder and more. Just like the laundry detergent on the inside of the machine, the fabric softener can build up in the tray and will not let the good liquids through. Clear it out with an old rag that is damp with warm water.
For more information, contact a local appliance repair shop that specializes in washing machine repairs.